International sites:
 Italiano  English  Deutsch  Français  Spanish
 Português  Arabic  China  Russian
Ecatalog
Article code 1 to 10 of 21
«TOP «PREV 10 <PREV    [1]  2  3  NEXT> NEXT 10» LAST»
Search: Jena-Tec
Refine your search:

Article code Manufacturer Brand Description Image Enquiry
140051:235.26   Jena-Tec  BALL THREAD SPINDLE- KGT-G-40x5RHx468 / 373 according to drawing EN04-006-00K-2  
KGT 50-3-25-1288-0-1-0   Jena-Tec  Ball screw KGT-G-50x25P12,5Hx1488 / 1288 according to drawing C-1020. - Ball screw profile according to manufacturer''s choice- Ball screw hardened and ground- Slope deviation 23?m / 300mm- Spindle material: Cf53 flange flange nut-2 + 2 revolutions - PTFE wiper on both sides- bore pattern 2 and flange B according to DIN 69051- total nut length against drawing 147 mm- load ratings : Cdyn. 72.8 kN; Cstat. 171.5 kN- Running and position tolerances acc. To DIN ISO 3408-3- Spindle outside diameter 48  
KGT5 0-1-25-1265-0-1-03   Jena-Tec  Ball screw KGT-G-50x25RHx1488 / 1265 according to drawing C-1026. - Ball screw profile according to manufacturer''s choice - Ball screw hardened and ground- Pitch deviation ..?m / 300mm- Spindle material: Cf53- Flange double nut-3x3 revolutions - PTFE scraper on both sides- Drill pattern 2 and flange B to DIN 69051- Total nut length against drawing 231 mm- Load ratings : Cdyn. 56.9 kN; Cstat. 128,8kN Spindle outside diameter 48 mm in the ball thread area is due to the material- Ball diameter 7,1  
ARTIKEL-KGT   Jena-Tec  KGT-G- 40x25RHx1346 / 1176 acc. To drawing 2125693 - - Ball screw profile hardened and ground - pitch deviation 23 ?m / 300mm- Spindle material: Cf53 flange flange nut 2x3 revolutions shifted- on both sides PTFE finger wiper, overhanging Drill pattern 2 and flange B according to DIN 69051- total nut length against drawing 209 mm- basic load ratings: C dynamic. 49.3 kN; Cstat. 97.4 kN- Running and positional tolerances acc. To DIN ISO 3408-3- Remarks / alterations- Spindle outside diameter 38 mm  
KGT-G-50x20RHx1200/1048 n.Zg. C-919   Jena-Tec  - Ball screw profile according to the manufacturer''s choice - Hardened and ground ball screw - Pitch deviation ..µm / 300mm - Spindle material : Cf53 - Flanged single nut 1x4 turns, preloaded - PTFE wipers on both sides, internal - Hole pattern 2 and flange C according to the drawing - Overall nut length according to drawing max. 132 mm - Load ratings: Cdyn. 60kN; Cstat. 136kN - Running and positional tolerances according to DIN ISO 3408-3 Remarks / Changes - Spindle outer diameter 4  
75095   Jena-Tec  Ball thread screw 32mm; 10mm  
All products   Jena-Tec  Jena-Tec All products  
ARTIKEL-KGT   Jena-Tec  KGT-G-32x5RHx468 / 393 according to drawing C-908 - Ball screw profile according to manufacturer''s choice- Ball screw thread hardened and ground- Slope deviation 23?m / 300mm- Material spindle: Cf53 flange flange nut 1x4 revolutions- both sides PTFE scraper, inside- Drilling pattern 1 and flange B to DIN 69051- Total nut length to drawing 48 mm- Load ratings: Cdyn , 18.6 kN; Cstat. 42.4 kN travel and position tolerances according to DIN ISO 3408-3. Remarks / changes- Spindle outer diameter 31 m  
ARTIKEL-KGT   Jena-Tec  KGT-G-40x15Hx565/382 n.Zg. C-910 - Ball screw profile according to the manufacturer''s choice- Ball screw hardened and ground- Pitch deviation 23µm / 300mm- Material spindle: Cf53- Flange nut-1x5 revolutions, preloaded- PTFE wiper on both sides, inside- Drilling pattern 2 and flange C according to drawing- Total nut length against drawing 114 mm- Basic load ratings: Cdyn. 52.3 kN; Cstat. 114.3 kN running and position tolerances according to DIN ISO 3408-3  
ARTIKEL-KGT   Jena-Tec  KGT-G-40x10RHx633/500 n.c. C-709 Your article no.: Ball thread profile according to manufacturer''s choice. Ball screw hardened and ground. Pitch deviation 23µm / 300mm. Material spindle : Cf53. Flange nut 2x4 revolutions shifted. PTFE wiper on both sides, internal. Hole pattern and flange shape according to sample. Total nut length against drawing 141 mm. Load capacities: Cdyn. 52.7 kN; Cstat. 116.3 kN. Running and position tolerances according to DIN ISO 3408-3. outside spindle diameter 38 mm  

Article code 1 to 10 of 21
«TOP «PREV 10 <PREV    [1]  2  3  NEXT> NEXT 10» LAST»
If you didn't found exactly what you are searching for,
please, send us however an enquiry.

- Designated trademarks and brands are the property of their respective owners -

Member of DIN ISO 9001 Unitec